Need help?Do you have a question about the Mellanox Technologies ConnectX-3 MCX341A-XCAN and is the answer not in the manual?
General| Product Name | ConnectX-3 |
|---|---|
| Model Number | MCX341A-XCAN |
| Product Type | Network Card |
| Manufacturer | Mellanox Technologies |
| Connectivity | Wired |
| Connector Type | SFP+ |
| Form Factor | Low Profile |
| Interface | PCI Express 3.0 x8 |
| Supported Protocols | Ethernet |
| Operating Temperature | 0°C to 55°C |
| Compliance | RoHS |
| Data Rate | 40 Gbps |
Specifies the target audience for this manual.
Lists other relevant documents and resources.
Provides links to Mellanox websites for support and downloads.
Outlines methods for contacting Mellanox technical support.
Standards for 10 Gigabit Ethernet data transfer.
Lists the single and dual port 10 Gigabit Ethernet adapter cards covered.
Explains how to locate the card's serial number and MAC address.
Lists important safety precautions for operating the hardware.
Details the various input/output interfaces on the mezzanine card.
Describes the power requirements and supply for the mezzanine cards.
Explains the memory devices supported by the mezzanine cards.
Specifies the necessary hardware components for installation.
Provides step-by-step instructions for installing the mezzanine card.
Guides users on how to identify the installed mezzanine card in their system.
Details the types of cables and modules compatible with the SFP+ ports.
Instructions for installing and managing the device drivers.
Information for installing Mellanox drivers in VMware ESXi environments.
Details Mellanox FlexBoot for multiprotocol remote boot technology.
Explains the RDMA over Converged Ethernet (RoCE) capabilities.
Guides on how to update the mezzanine card's firmware.
Detailed specifications for the MCX342A-XCAN Mezzanine Card.
Detailed specifications for the MCX341A-XC[AB]N Mezzanine Card.
Provides mechanical drawings and dimensions for the mezzanine cards.
Links to regulatory compliance information for ConnectX®-3 cards.
Details the pinout for the I2C-compatible connector.
Describes the pinout for the PCI Express x4 connector.
Provides the pinout diagram for the SFP+ cage.
To Next Page