Rev. 1.717 Mellanox Technologies
Figure 4: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet
Figure 5: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet
2.3 Package Contents
Before installing your new system, unpack it and check against the parts list below that all the
parts have been sent. Check the parts for visible damage that may have occurred during shipping.
The SB77X0/SB78X0 package content is as follows:
• 1 x System
• 1 x Rail kit
• 2 x Power cables – Type C13-C14
• 1 x Harness: HAR000028 – Harness RS232 2M cable – DB9 to RJ-45 (in SB7X00 mod-
els only)
• 2 x Cable retainers
•Quick Start Guide
If anything is damaged or missing, contact your sales representative at support@mella-
nox.com.
To Next Page
Loading...
