EN
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Description
A – Tall cup
B – Base
C – Power cord
D – Antislip feet
E – Short cup
F – Milling blade
G – Take away lid
H – Regular lid
I – Extractor blade
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all products’
packaging has been removed.
Before using the product for the rst
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
USE
Extend the cable completely before
plugging it in.
Connect the appliance to
the mains.
EXTRACTING FUNCTION
Fill ingredients into the tall or
short cup.
Twist on the extractor blade.
Place the cup onto the base. Press
down and twist to lock the motor on.
You can see the extraction process
happening. Keep an eye on the
consistency. The smoothy is ready
when it looks smooth and creamy.
MILLING FUNCTION
Fill ingredients into the short cup.
Twist on the milling blade.
Place the cup onto the base. Press
down and twist to lock the motor on.
Mill your ingredients until you
achieve the desired consistency.
SHAKE TECHNIQUE
Sometimes, if you over ll the cups
with ingredients or don’t put enough
water, the results can increase the
density of the mixture. This makes
it hard for the ingredients toward
the top of the cup to make it
down to the blade. If some of your
ingredients are having a hard time
making it down to the blade, simply
do the following steps:
- Remove the cup and blade
assembly from the power base.
- With the cup and blade
assembly in hand, shake it like
a cocktail shaker. Then put it
backon the power base.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
To stop the appliance, remove the
cup from the base by turning it
counter-clockwise.
Unplug the appliance from
the mains.
Clean the appliance.
To Next Page
Loading...
