To Next PageTo Next PageWhat to do if my Member's Mark Cahaba FZA10174SST fire won't light?
If your Member's Mark Outdoor Fireplace fire won't light, there could be a couple of reasons. First, check the LP (propane) tank or the Natural Gas valve at main to ensure you have gas. You may be out of gas. Second, a plugged burner orifice can also prevent ignition. Check the burner orifice for any blockage and remove it.
Why does my Member's Mark Cahaba FZA10174SST have low flames or won’t stay lit?
If your Member's Mark Outdoor Fireplace has low flames or won’t stay lit, it might be due to the manual shutoff valve not being properly open or installed between the LP tank and the appliance. To resolve this, close both the LP tank and manual shutoff valves. Then, open the LP tank valve first, followed by the manual shutoff valve.
How to fix blue flames on Member's Mark Cahaba FZA10174SST Outdoor Fireplace?
If you observe blue flames on your Member's Mark Outdoor Fireplace, it could be related to an improper air/fuel mixture due to the air shutter position. Try closing the air shutoff. For LP, leave it 1/4” open, and for natural gas, leave it 1/16” open.
General| Brand | Member's Mark |
|---|---|
| Model | Cahaba FZA10174SST |
| Category | Outdoor Fireplace |
| Language | English |
Details the compatible fuel types for the appliance.
Specifies required input pressures for optimal performance and safety.
Provides guidelines for safe gas supply connection per local codes.
