Memco C100 BASE1 - Page 10

Relay Override
GMT Oset
Will not need updating on the unit. For reference only.
Templates
The current programming selection on the C100 Programming
Tool (C100 PT) can be saved as a template to allow ‘One Touch
Programming’.
Up to eight programming templates can be stored on the C100 PT.
Relay Override >
None The relay will switch according to the Relay Mode
setting.
Open The relay contacts will be held in the open state
until Relay Override is changed again.
Closed The relay contacts will be held in the closed state
until Relay Override is changed again.
Full Programming Options
Menu Structure
Menu Sections explained...
Full Programming Options
Menu Structure
Full Programming Options
Menu Structure
Advanced >
Passcode
Network ID
Next EN81 call
PBX Frequency
Language >
Relay mode >
Relay override>
GMT Oset
Templates
Load Template
Save Template
Del. Template
If you require any further assistance when
programming the C100 unit, please call our
Technical Service Team on:- 01628 540160.
Load Template
1. Load a programming template onto the C100 telephone:
2. Select the required programming template from the list and
press 
3. In the conrmation screen press  to load the template or
press  to cancel
4. If no templates are saved to the C100 PT then the list will be
blank
Save Template
1. Save the current programming selection on the C100 PT as a
template:
2. Select (NEW TMEPLATE) and press 
3. In the conrmation screen press  to load the template or
press  to cancel
4. The C100 PT will automatically name the template (starting with
‘TEMPLATE 1’).
5. Overwrite an existing template with the current programming
selection on the C100 PT:
6. Select the template you whist to overwrite form the list and
press 
7. In the conrmation screen press  to load the template or
press  to cancel
Del. Template
1. Delete a template from the C100 PT:
2. Select the required programming template from the list and
press 
3. If no templates are saved to the C100 PT then the list will be
blank
4. In the conrmation screen press  to load the template or
press  to cancel.
C100 851 IG AG: 24/08/2017
Avire Ltd
Unit 1, The Switchback
Gardner Road
Maidenhead
Berkshire
SL6 7RJ, UK
T: 01628 540100
F: 01628 621947
E: sales.uk@avire-global.com
W: www.avire-global.com
Memco is a brand of Avire