22
Chapter 2 Installing the LCD TV
For best picture quality, if your equipment has component video output, use
a component cable instead of a composite video or S-video cable.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a DVD, press the INPUT button on the remote, then using the ▲ or ▼ button to
select VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5
(METHOD C), or VIDEO6/VIDEO7 (METHOD D),and press OK button.
To Next Page
Loading...
