To Next PageTo Next PageWhat to do if my Memorex TV has color spots?
If you notice color spots on your Memorex TV screen, this could be due to color purity issues caused by moving the TV, placing magnets nearby, or using appliances like vacuum cleaners close to the TV. Try turning off the TV using the main power switch for 15 minutes. When you turn it back on, the TV will automatically degauss the picture. If the issue is severe, leave the TV off overnight.
How to fix double or triple image on Memorex TV?
Double or triple images, also known as "ghosting," on your Memorex TV can be caused by electrical interference from sources like cars, motorbikes, fluorescent lamps, or dirty insulators on power cables. To minimize this, use an outside aerial with good quality cable and terminations. You can also try altering the direction of the aerial.
What to do if my Memorex TV has no picture?
If your Memorex TV has no picture, ensure that the power supply is properly connected and turned on. Also, check that the TV is not in "Listen Mode" and that the brightness and contrast settings are not turned down.
Why is there poor or no picture on my Memorex MT2025D?
There are several reasons why you might experience poor or no picture quality. First, the TV station itself may be experiencing problems, so try tuning to another channel. Ensure that the picture control settings are properly adjusted. Local interference can also cause this issue; check for any sources of reception disturbance. Finally, verify that the antenna or CATV connector is securely connected.
What to do if my Memorex CRT TV has poor or no sound?
If you're experiencing poor or no sound, the issue could stem from several causes. First, try tuning to another channel in case the TV station is having problems. Make sure the 'MUTE' button hasn't been accidentally pressed. Check for any potential sources of local interference that might be affecting the sound. Ensure the antenna or CATV cable is properly connected. Also, verify that the volume isn't set to the minimum level.
What to do if my Memorex CRT TV remote control does not operate?
If your remote control isn't working, first make sure you're aiming it directly at the remote sensor on the TV. Ensure you are within 20 feet of the TV and that there isn't too much light in the room. Also, check for any obstructions blocking the path between the remote and the TV. Weak batteries can also cause this, so try replacing them. Finally, ensure the batteries are inserted correctly.
Why does my Memorex MT2025D CRT TV shut off by itself?
Your Memorex CRT TV might be shutting off for a few reasons. The TV station might have stopped broadcasting, so try tuning to a new channel. The Sleep Timer function may be activated; turn it off in the settings. Lastly, check if a home circuit breaker has blown, and reset or replace it if necessary.
What to do if my Memorex CRT TV has no CATV (Cable) reception?
If you're not getting any CATV (Cable) reception, start by checking all your CATV (Cable) connections to ensure they are secure. Then, verify that the RECEPTION option is set to 'CABLE' in the TV settings. If the issue persists, your cable TV service might be interrupted, so contact your Cable TV company.
How to fix picture wobbles or drifts on Memorex MT2025D CRT TV (NTSC mode)?
If the picture on your Memorex CRT TV wobbles or drifts, especially in TV (NTSC) mode, it could be due to a few reasons. The TV station may be experiencing problems, so try switching to another channel. If you're using cable, the channel might be scrambled, requiring a cable box. Also, check for any local interference that could be causing the issue.
How to fix no reception above ch69 on Memorex CRT TV?
If you're unable to receive channels above ch69 on your Memorex CRT TV, particularly in TV (NTSC) mode, ensure that the RECEPTION option is set to 'CABLE'.
General| Display Type | CRT |
|---|---|
| Aspect Ratio | 4:3 |
| Speakers | Mono |
| Screen Size | 20 inches |
| Inputs | Composite |
