To Next PageTo Next Page
Need help?Do you have a question about the Mennekes AMTRON Professional+ E 7,4 / 22 and is the answer not in the manual?
General| Charging Power | 7.4 kW / 22 kW |
|---|---|
| Charging Current | 32 A |
| Charging Connector | Type 2 |
| Operating Temperature | -30°C to +50°C |
| Charging Voltage | 230 V |
| Charging Point | Type 2 |
| Communication | OCPP 1.6 |
| Authorization | RFID |
| Metering | Calibrated meter |
| Protection Class | IP54 |
Contact information for support and service partners.
Explains danger, warning, caution, and attention notices.
Defines owner/operator and qualified electrician roles.
Specifies the device's purpose for charging EVs.
Details what constitutes improper and non-intended use of the device.
Emphasizes the need for electrical engineering expertise for certain tasks.
Covers handling damaged devices and improper maintenance risks.
Highlights the need to keep children and animals away from the device.
Provides guidelines for safe handling and use of the charging cable.
Advises on tidiness to prevent tripping hazards and damage.
Explains the meaning and importance of safety labels on the device.
Describes the information found on the device's type plate.
Lists all items included in the device package.
Details the physical components and layout of the device.
Explains how the charging cable can be hung on the housing.
Mentions that energy consumption can be read from the energy meter.
Describes the function of the multifunction button for specific versions.
Explains the different operating modes available for the device.
Details the status indications provided by the LED information panel.
Describes the different versions of the device based on charging connectors.
Provides requirements and minimum distances for device placement.
Outlines the suitable ambient temperature, humidity, and altitude.
Tasks to perform before installing the device indoors.
Instructions on routing the power supply cable to the device.
Details the required fuse protection and component compatibility.
Steps for safely opening the device enclosure.
Instructions and guidelines for securely mounting the device on a wall.
Covers the main electrical connection aspects of the device.
Details on connecting the device to the power supply network.
Instructions for connecting the shunt release for specific versions.
Guides on establishing a connection to the ECU for configuration.
Instructions for configuring the device using its web interface.
Describes the device configuration for standalone operation without authorization.
Details configuration for standalone operation using RFID cards.
Explains how to configure the device for backend system connection.
Setup for operating multiple devices together via Ethernet.
How to set the maximum charging current for the device.
Accessing and configuring advanced device settings.
Step-by-step guide for inserting the SIM card into the device.
Safety precautions and steps for powering on the device.
Explains how to monitor the power supply and phase sequence.
Procedures for testing the device's functionality before operation.
Instructions on how to properly close the device after maintenance.
Details the different methods for authorizing charging sessions.
Step-by-step guide on how to charge an electric vehicle.
Describes the function of the multifunction button for specific versions.
Procedure to reset the RCD and circuit breaker using the button.
How to test the functionality of the residual current device.
General guidelines for regular inspection and maintenance of the device.
Instructions for safely cleaning the exterior of the device.
How to read and interpret error messages displayed on the device.
Guidance on selecting and using approved spare parts for troubleshooting.
Steps to manually unlock the charging plug if the automatic function fails.
