Periods Programming
Hold the key for 5 seconds to begin programming. When finished press the key to exit.
Extreme care MUST be taken when adjusting the technical parameters found within the advanced settings. Operation of
these functions should only be undertaken by competent people and the following details should be read carefully.
To enter advanced settings turn the thermostat off, then hold the key down and press simultaneously.
HVAC CONTROLS PRODUCTS DS/MRD-06-100114E
Release the front cover by inserting
a screwdriver into slot on base.
Mount the backing plate onto the wall socket.
Make electrical connections to the thermostat (see
below.) Mount the thermostat back onto the
backing plate & replace the frame.
To Next Page
Loading...