Quick Start Guide
Insert batteries.
Download Meraw Health App and set up Bluetooth
connection.
1. The monitor needs to be at OFF status before connection;
2. Open Meraw Health App, make sure you have authorized Bluetooth and location
permission for the App (important!)
3. Long press Bluetooth button on the monitor until the "Bluetooth" symbol blinks in the
screen(don’t press "start/stop" button);
4. Follow the instruction in the App, “Add device” - ”Meraw Aspen” - “Start connection”;
5. The pairing will complete automatically.
1
2
BATTERY COMPARTMENT
App download Video instruction
To Next Page
