Need help?Do you have a question about the Merax Z1Z-CF02-80 and is the answer not in the manual?
Ensure proper grounding of electrical lines to prevent shock and equipment damage.
Adhere to safety guidelines including pre-drilling checks, correct handling, and personal protective equipment.
Secure the machine using an expanded screw through the base hole for ground or wall mounting.
Utilize a metal pipe stripper between the roof and regulation screw for stable drill mounting.
Models 205/255 NA can use a vacuum pump for fixation; safety straps are recommended.
Grease bit threads, insert lightly, and test rotation to ensure proper installation.
Ensure lubrication, align drill, maintain uniform effort, and manage rotation for efficient drilling.
Details on model types, maximum stroke, voltage, frequency, wattage, and load capacity.
Contact authorized service for maintenance and periodically check/replace worn brushes.
Covers manufacturing defects for 6 months; excludes damage from misuse, accidents, or non-compliance.
To Next Page
General