310
Controls in detail
Loading
Loosening the partition net
Belt hook attached in the second-row
footwell
1 Buckle
2 Belt hook
3 Cargo tie-down ring
왘 Loosen the tightening belt by pulling
buckle 1 upward in direction of arrow.
왘 Remove belt hook 2 from cargo
tie-down ring 3.
Removing and storing the partition net
왘 Take partition net bar 2 out of
holder 1, see “Installing the partition
net” (
컄 page 309).
왘 Press the red button on the upper and
lower partition net bar.
왘 Fold the partition net.
왘 Roll up the partition net.
왘 Close the zipper on partition net
package.
To Next Page
Loading...
Need help?
General
