Vehicle dimensions
G 550
Vehicle length191.6 in
(4866 mm)
Vehicle width including out‐
side mirrors
86.1 in
(2187 mm)
Vehicle height 77.5 in
(1969 mm)
Wheelbase 113.8 in
(2890 mm)
Turning radius 44.6 ft
(13.6 m)
Minimum ground clearance 9.5 in
(241 mm)
Weights and loads
Note that items of optional equipment increase
the curb weight and reduce the payload.
Vehicle data for off-road driving
Fording depth
*
NOTE Damage caused by water when
fording
Water can enter the engine compartment
and vehicle interior if:
R
you exceed the maximum permissible
fording depth when driving through stand‐
ing water
R
a bow wave forms during fording
R
water accumulates during fording of flow‐
ing water
#
Do not exceed the maximum permissi‐
ble fording depth and drive slowly
through the water.
The specified value indicates the maximum per‐
missible fording depth for vehicles that are ready
to drive. It applies to slow driving through stand‐
ing water.
Driving through flowing water reduces tire trac‐
tion. The permissible fording depth is then corre‐
spondingly lower.
Observe the notes on off-road driving and ford‐
ing (/ page 136).
Model
11 Fording
depth
G 55027. 6 in (70 cm)
Approach/departure angle
The specified values are maximum values for
vehicles that are ready to drive.
424
Technical data
To Next Page
Loading...
Need help?
General
