show temperature 2 or 3 in blue. Avoid using
the full engine power output during this time.
Engine data (example)
1
Current power output
2
Current torque
When current power output 1 or current torque
2 reaches the maximum value, the digital value
will briey be stationary. The bar display will con-
tinue.
SETUP in Mercedes-AMG vehicles (example)
1
Drive system setting:
Reduced/Moderate/Sport/Dynamic
2
Transmission position:
D/M
3
AMG DYNAMICS:
Basic/Advanced
4
Suspension tuning:
Comfort/Sport/Sport+
RReseesetting ttting the G-methe G-meterer
While the vehicle is in motion, the G-meter shows
the forces that are exerted on the vehicle occu-
pants both laterally and in the direction of travel.
The maximum values are represented by red
markings.
G-meter (example)
#
Press the le-hand Touch Control.
#
Select Yes.
#
Press the le-hand Touch Control.
FFunction of tunction of the Head-up Displayhe Head-up Display
The Head-up Display projects the following infor-
mation into the driver's eld of vision above the
cockpit, for example:
R
The vehicle speed
Instrument display and on-board computer
2121
To Next Page
Loading...
Need help?
General
