X
Open the hood.
X
Use a dry cloth to remove any moisture
from the fuse box.
X
To open: open clamps ;.
X
Fold up cover : in the direction of the
arrow and remove it.
X
To close: check whether the seal is seated
correctly in cover :.
X
Insert cover : at the side of the fuse box
into the retainers.
X
Fold down cover : and close clamps ;.
X
Close the hood.
Fuse box under the rear bench seat
Pay attention to the important safety notes
(Y page 394).
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses or the cover
could be damaged by the rear bench seat.
X
Fold the right-hand rear bench seat forward
(Y page 335).
X
To open: lift and fold out carpet : in the
direction of the arrow.
X
Release clamps ; by pressing them in the
direction of the arrow.
X
Fold cover = up in the direction of the
arrow and remove it.
i
The fuse allocation chart is located under
cover =.
X
To close: insert cover = into the retainers
on the side of the fuse box.
X
Fold down cover = until clamps ; engage
audibly.
X
Fold the right-hand rear bench seat back
(Y page 335).
396
Fuses
Breakdown assistance
To Next Page
Loading...
Need help?
General
