Merck easypod - Attach the Needle; Inject

1. Attach the Needle
Remove the sterility seal
Click the needle cap into
easypods needle cavity
The needle clicks into place
and easypod beeps twice
To remove the needle cap,
first bend it sideways and
then pull it out
4
2. Inject
Place easypod against
your skin
easypod beeps once
The green injection button light
comes on
Press the injection button
The green injection button light
flashes
easypod beeps twice
The green injection button light
turns off
The injection is complete and
you can remove the device
5