Need help?Do you have a question about the Mercola Vitality D-LITE and is the answer not in the manual?
General| Brand | Mercola |
|---|---|
| Model | Vitality D-LITE |
| Category | Tanning Beds |
| Language | English |
Outlines warranty periods for different tanning system components.
Specifies conditions that void the warranty or are not covered.
Advice on safe tanning practices to avoid injury.
Consult a doctor if using medications or sensitive to UV light.
FDA-approved eyewear is mandatory for all persons in the room.
A dedicated circuit breaker is required for the tanning system.
Requirements for voltage range (100-130V) and NEMA 5-15R receptacle.
Proper grounding is vital; failure to comply voids warranties.
Ensure adequate room size and ventilation for proper operation.
Steps for unpacking components and inspecting for damage.
Details on personnel, tools, parts list, and hardware needed.
Step-by-step guide for attaching the bench legs securely.
Guide for attaching the left and right arms to the bench unit.
Attaching canopy arms using allen bolts, ensuring not to overtighten.
Steps for lifting and aligning the canopy to the bench arms.
How to snap the gas shocks into place on the canopy and bench.
Instructions for attaching the pedestal components to the tanning bed.
Connecting power cords and plugging into a dedicated outlet.
Strict rules against cord conversion or improper extension cords.
Advice on skin care, lotions, and hair products before tanning.
Emphasizes wearing FDA-approved eye protection during sessions.
Chart showing tanning durations by skin type and progress.
Steps including determining time, applying lotion, and wearing goggles.
Instructions for starting, adjusting, and canceling tanning sessions.
Allow two hours for the bed to cool before any cleaning or maintenance.
Outlines recommended care tasks at intervals like after each session, weekly, monthly, etc.
Use specific cleaners and avoid ammonia/alcohol to protect acrylics.
Detailed steps for safely removing acrylic trim and panels.
Steps for putting the acrylic panels and trim back in place.
How to remove and install tanning lamps by turning them a quarter turn.
Lists FDA-certified lamps; unauthorized use voids warranty.
Guidelines for cleaning lamps and reflectors to maintain performance.
Contact dealer for assistance, warranty parts, or maintenance.
Steps to diagnose why tanning lamps are not working.
Potential ballast issues for multiple unlit lamps.
Check gas shock installation if the canopy doesn't stay upright.
Addresses questions on bed activation, lotion use, and tan development.
Covers eye protection, contact lenses, and skin reactions like rashes.
Explains photosensitivity as an immune or toxic reaction to UV light.
Details symptoms like burning, blotches, and uneven pigmentation.
Lists medicines that can cause photosensitivity reactions.
Specific drugs requiring consultation or avoidance before tanning.
Advises consulting a doctor before tanning during pregnancy.
Using the product commercially voids all manufacturer warranties.
Fields to record purchase and dealer details for service.
Details required receptacle, voltage, room size, temperature, and lamp hours.
Provides physical dimensions of the tanning bed in open and closed states.
Critical warnings about UV radiation, overexposure, and eye/skin injury.
Emphasizes reading the manual and wearing protective eyewear.
Advises consulting a physician regarding medications and sun sensitivity.
To Next Page