Mercury 15 EFI SeaPro - Starter Motor Will Not Crank the Engine (Electric Start Models); Engine Will Not Start; Engine Runs Erratically

• One anode is located on the bottom of the lower engine mount. A screw
secures it and two continuity wires to the mount.
a - Anode
b - Screw
c - Continuity wire (from swivel bracket to lower mount)
d - Lubrication fitting
e - Continuity wire (from lower mount to driveshaft housing)
• Two anodes are located near the bottom of the transom brackets. The
anodes are secured to the brackets with screws.
62959
When installing an anode, be certain to tighten the fasteners to the specified
torque.
62942
a
b
c
d
e
MAINTENANCE
eng 93