Mercury 15XD - Page 202

POWERHEAD
90-826883R2 JUNE 1998 Page 4-45
10. Apply outboard oil to upper and lower roller bearings and install bearings on crank-
shaft. Numbered side of bearing should face UP or OUT on bearings.
11. Install new upper and lower crankshaft seals. Both seal lips face down.
Apply 2-4-C w/Teflon to seal lips.
57089
a
b
14
2 Cycle Outboard Oil (92-826666A24)
95
2-4-C With Teflon (92-825407A12)
95
95
14
14
57089
c
d
a - Upper Crankshaft Seal
b - Upper Crankshaft Bearing (Numbers/letters face up/out)
c - Lower Crankshaft Bearing (Numbers/letters face down/out)
d - Lower Crankshaft Seal