34
desired point (found by watching the elapsed
playing time in the display or by listening to the
sound during fast forward or reverse). When
you have reached the beginning of track 1, the
CD player will begin playing.
*
[AS08000( BC )10/95]
When you have reached the end of the disc by
keeping the fast forward button pressed, the
display will show “END” and the player will go
into pause mode. Push the “PLAY/STOP”
button to begin playing the first track of the
disc, press the “REV” button to back up from
the end of the disc, or use the “SEEK” function
to locate a desired track.
*
[AS08020( BC )10/95]
Using the “SCAN” function
[AS08030( BC )10/95]
Press the “SCAN/TUNE” button to enter the
scan mode. Once in the scan mode, press the top
a
or bottom
b
half of the “SEEK” button to
scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on
each listenable track for approximately eight
seconds. This continues until you press the
“SCAN/TUNE” button a second time. While in
the scan mode, the display shows the current
sampled track number.
*
[AS08040( BC )10/95]
Special features of your CD player
*
[AS08050( BC )10/95]
❑
Compression
*
[AS08060( BC )10/95]
The compression feature will bring soft and
loud passages closer together for a more
consistent listening level.
*
[AS08070( BC )10/95]
To turn the compression on, press the
“COMP” button. When on, the compression
indicator (“C”) will appear in the display.
Press the button again to turn off.
File:04rcasc.ex
Update:Thu May 30 10:24:18 1996
To Next Page
Loading...
