Controls and features
40
Replacing lost transmitters
Take your transmitters to the
dealer for reprogramming if:
• a transmitter is lost or
• you want to purchase additional
transmitters.
This device complies with part 15
of the FCC rules. Operation is
subject to the two following
conditions: (1) The device may not
cause harmful interference, and
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.
To replace the batteries:
1. Twist a thin coin between the
two halves of the transmitter. Do
not take the front part of the
transmitter apart.
2. Remove the old batteries.
3. Place the positive (+) side of the
new batteries down.
4. Snap the two halves of the
transmitter back together.
CDW IIIC3Cont en MM 5/15/97 7:45 PM Page 40
To Next Page
Loading...
