Driving
132
Overriding the brake-shift
interlock feature
If you cannot move the gearshift
lever from P (Park) with the brake
pedal depressed:
1. Turn the ignition off and remove
the ignition key.
2. Apply the parking brake and the
brake pedal.
3. Insert a screwdriver or similar
item about 5 cm (2 inches) into the
square opening to the right of the
gearshift at the base of the console.
On vehicles without the opening,
insert a screwdriver or similar item
about 5 cm (2 inches) inward,
directly below the arrow symbol
located to the right of the gearshift
at the base of the console.
4. Rotate the screwdriver point
rearward.
5. Push and hold the thumb button
and move the gearshift.
6. Remove the screwdriver when
the gearshift moves from the P
(Park) position.
This procedure may have to be
repeated each time the gearshift is
placed in park until repairs are
completed.
To Next Page
Loading...
