Mercury 1999 Mountaineer - Indicator Light; To Return to a Previously Set Speed

Pressing OFF will erase the
previously programmed set speed.
To return to a previously set speed
• Press RES/RSM/RESUME. For
RES/RSM/RESUME to operate,
the vehicle speed must be faster
than 48 km/h (30 mph).
Indicator light
This light comes on when either the
SET ACC/SET ACCEL or
RES/RSM/RESUME controls are
pressed. It turns off when the speed
control OFF control is pressed, the brake is applied or the ignition is
turned to the OFF position.
OFF
ON
RSM
SET
ACC
COAST
SPEED
CONT
Controls and features
84