Roadside emergencies
159
2. Remove the jumper cable on the
negative (-) connection of the
booster vehicle’s battery.
4. Remove the jumper cable from
the positive (+) terminal of the
disabled vehicle’s battery.
3. Remove the jumper cable from
the positive (+) terminal of the
booster vehicle’s battery.
After the disabled vehicle has been
started and the jumper cables
removed, allow it to idle for several
minutes so the engine computer
can “relearn” its idle conditions.
23MREen 24.6.99 15:28 Uhr Seite 159
To Next Page
Loading...
