6. AUTO: Press to engage full
automatic operation, and select the
desired temperature using the
temperature control. The system will automatically determine fan speed,
airflow location, A/C on or off, and outside or recirculated air, to heat or
cool the vehicle to reach the desired temperature.
7. Fan Speed: Press to manually
increase/decrease fan speed. To
return to automatic fan operation,
select AUTO.
8. Manual override controls:
Allows you to change the system
operation. To return to full
automatic control, press AUTO.
9. F
: Distributes outside air
through the windshield defroster
vents. Can be used to clear ice or
fog from the windshield.
10.
R
(Rear defroster): Press
to activate/deactivate rear window
defroster. For more information,
refer to Rear window defroster in this chapter.
11.
: Distributes air through the windshield defroster vents and floor
vents.
12.
: Distributes air through the floor and rear seat floor vents (if
equipped).
13.
: Distributes air through the instrument panel registers, and the
front and rear seat floor vents.
14.
: Distributes air through the instrument panel registers.
Fahrenheit/Celsius temperature: Press A/C and F controls at the
same time, to toggle between Fahrenheit and Celsius temperature. The
set point temperatures in Celsius will be displayed in one degree
increments.
REVIEW COPY
2005 Sable (sab), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)
Climate Controls
26
To Next Page
Loading...
Need help?
General
