EasyManua.ls Logo

Mercury 2008 Milan - Disarming the System; Triggering the Anti-Theft System

Mercury 2008 Milan
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Each door, the hood or the trunk is armed individually, and if any are
open, they must be closed for the system to enter the 20 second
countdown.
The turn signal lamps will flash once when all doors, the hood and the
trunk are closed indicating the vehicle is locked and entering the 20
second countdown.
Disarming the system
You can disarm the system by any of the following actions:
Unlock the doors by using the remote entry transmitter portion of
your Integrated Keyhead Transmitter.
Unlocking the doors using the keyless entry keypad (if equipped).
Unlock the driver’s door with a key. Turn the key full rearward
(toward the rear of the vehicle) to ensure the alarm disarms.
Turn ignition to the 3 (ON) position with a valid SecuriLock™ key.
Press the panic control on the remote entry transmitter portion of
your IKT. This will only shut off the horn and turn lamps when the
alarm is sounding. The alarm system will still be armed.
Pressing the power door UNLOCK control within the 20 second
prearmed mode will return the vehicle to a disarmed state.
Triggering the anti-theft system
The armed system will be triggered if:
Any door, the hood or the trunk is opened without using the door key
or the remote entry transmitter portion of your IKT.
The ignition is turned to the 3 (ON) position with an invalid
SecuriLock™ key.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
112

Table of Contents

Other manuals for Mercury 2008 Milan

Related product manuals