POWERHEAD
Page 4A-26 90-884294 OCTOBER 2001
11. Remove 10 nuts and 10 washers (5 each side) from powerhead base.
52373
a
a
a
a
a
a-Nuts and Washers (5 each side)
12. Remove plastic cap from center of flywheel and install Lifting Eye 91-90455 into flywheel
at least 5 full turns. Using a hoist, lift powerhead assembly from driveshaft housing.
59076
a
a-Lifting Eye 91-90455
To Next Page
Loading...
