Mercury 250 Jet Drive - Secure bellows to thru-hull fitting

250 HP JET DRIVE INSTALLATION MANUAL
Page 26
90-10240040 DECEMBER 2003
9. Secure bellows to thru-hull fitting with clamp. Slide slit adaptor over cable and push into
bellows. Secure with clamp.
b
c
c
d
e
a
a-Shift Cable, Thru-Hull Fitting, and Bellows Assembly
b-Thru-Hull Fitting and Nut
c-Clamp
d-Bellows
e-Slit Adaptor
NOTE: Check for proper placement of slit adaptor around cable. Placement of wrong slit
adaptor may result in leak.