250 HP JET DRIVE INSTALLATION MANUAL
Page 37
90-10240040 DECEMBER 2003
CAUTION
BEFORE mounting flush adapter bracket, route flush adapter and hose to selected
mounting location. Hose routing MUST NOT INTERFERE with throttle and/or con-
trol linkage.
NOTE: Mount flush adapter bracket in an area of the motor compartment that has a mount-
ing surface that is thicker than the depth of the mounting screws.
3. Locate area (easily accessible) within motor compartment to mount flush adapter
holder. Secure with screws supplied.
a
b
a-Flush Adaptor Holder
b-Screw (3)
4. Snap flush adapter into holder as shown.
a
a-Flush Adaptor
To Next Page
Loading...
