33
og
FEATURES & CONTROLS
gog62
1-3 4
b
a
c
Tilting Operation (Fleet Master & Torque Master
Gear Cases)
To tilt outboard, shut off the engine and press the trim/tilt switch or
auxiliary tilt switch to the up position. The outboard will tilt up until
the switch is released or it reaches its maximum tilt position.
1 Engage the tilt support lever (a), by pushing in and rotating knob
(b) to bring support lever upward.
2 Lower outboard to rest on the tilt support lever.
3 Disengage the tilt support lever, by raising the outboard off the
support lever and rotating the lever down. Lower the outboard.
osc1
Auxiliary Tilt Switch
4
This switch (c) can be used to tilt the outboard up or down using
the power trim system.
(continued on next page)
To Next Page
Loading...
