9A-16 - POWER STEERING PUMP 90-823225--1 1096
8. Install pressure hose (fittings on both ends, from
kit) between power steering control valve and
large inverted flare fitting on priority valve. (This
fitting location is marked with an “S.”) Secure with
hose clamp. Tighten securely.
72865
b
a
a - Power Steering Control Valve
b - Hose Fitting
72866
b
a
a - Priority Valve
b - Hose Fitting
9. Connect No. 1 (starboard) engine pressure hose
(from pump) to inverted flare fitting marked by “1”
on priority valve. Connect No. 2 (port) pressure
hose (from pump) to inverted flare fitting marked
by “2” on priority valve. Secure with hose clamps.
Tighten securely.
72867
b
c
a
a - Priority Valve
b - No. 1 (Starboard) Pressure Hose
c - No. 2 (Port) Pressure Hose
10. Secure all hoses with Sta-Straps provided.
To Next Page
Loading...
