OUTBOARD INSTALLATION
eng 125
!
WARNING
Improper fasteners or improper installation procedures can
result in loosening or disengagement of the steering link rod.
This can cause a sudden, unexpected loss of boat control,
resulting in serious injury or death due to occupants being
thrown within or out of the boat. Always use required
components and follow instructions and torque procedures.
a - Special washer head bolt (10‑856680)
b - Nylon insert locknut (11‑826709113)
c - Spacer (12‑71970)
d - Flat washer (2)
e - Nylon insert locknut (11‑826709113)
f - Use middle hole ‑ steer outboard to the side to gain hole
access
Description Nm lb‑in. lb‑ft
Special washer head bolt 27 20
To Next Page
Loading...
