2. Install a fully charged battery. Clean the battery cable clamps and
terminals and reconnect the cables. Tighten each cable clamp securely
when connecting.
3. Coat the terminal connections with a battery terminal anticorrosion agent.
4.
Perform all the checks in the Operation Chart.
NOTICE
Without sufficient cooling water, the engine, the water pump, and other
components will overheat and suffer damage. Provide a sufficient supply of
water to the water inlets during operation.
5. Start the engine and closely observe instrumentation to ensure that all
systems are functioning correctly.
6. Carefully inspect the engine for fuel, oil, fluid, water, and exhaust leaks.
7. Inspect the steering system, shift and throttle control for proper operation.
COLD WEATHER OR EXTENDED STORAGE
100 eng
To Next Page
Loading...
