Maintenance
and care
195
Opening the hood
• Pull the handle (1) located under
the instrument panel.
• Release the safety catch by
reaching under the hood (2) and
pushing it up.
• Raise the hood and support it
with the strut (3) in the yellow
colored retainer, ensuring it is
secure. Hold the support at the
yellow colored insulation section.
To close, replace the support strut
in its retaining clip, lower the hood
and allow it to drop into the catch
for the last 20 - 30 cm
(8 - 12 inches).
Always check to ensure that the
hood lock is fully engaged.
To Next Page
Loading...
