• Lubricate the throttle and shift cable moving components, pivot
locations, and shift detent.
• Steering cable grease fitting (if equipped) ‑ Rotate steering wheel to
fully retract the steering cable end into the outboard tilt tube. Lubricate
through fitting.
a - Steering cable grease fitting
b - Steering cable end
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to serious
injury or death from loss of boat control. Completely retract the end of the
steering cable before applying lubricant.
2. Lubricate the following with lightweight oil.
• Steering link rod pivot points ‑ Lubricate points.
a - Steering link rod pivot points
To Next Page
Loading...
Need help?
General
