REFILL CAPACITIES
Fluid Ford Part Name Capacity
Engine oil (includes
filter change)
Motorcraft 5W30 Super
Premium Motor Oil
4.7L (5.0 quarts)
Brake fluid High Performance DOT 3
Motor Vehicle Brake
Fluid
Fill to line on
reservoir
Power steering fluid Motorcraft MERCONt
ATF
Fill to line on
reservoir
Transmission fluid Motorcraft MERCONtV
ATF
13.1L (13.9 quarts)
Engine coolant
2
13.3L (14.1 quarts)
Fuel tank N/A 71.9L (19.0 gallons)
Rear axle fluid
1
Motorcraft SAE 80W90
Rear Axle Lubricant
1.8-1.9L (3.75-4.0
pints)
Windshield washer
fluid
Ultra-Clear Windshield
Washer Concentrate
Fill to line on
reservoir
1
Add 118 ml (4 oz.) of additive friction modifier C8AZ-19B546–A, Ford
specification EST-M2C118–A for complete refill of Traction-Lok axles.
Service refill capacities are determined by filling the rear axle 6 mm to
14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.
Rear axles are considered lubricated for life when the vehicle is used for
normal service. See your “Service Guide” for Severe Duty requirements.
2
If your engine coolant is green, use Ford Premium Cooling System
Fluid; if your coolant is orange, use Ford Extended Life Coolant. Refer to
Lubricant Specifications for part numbers and specification numbers.
Capacities and specifications
143
To Next Page
Loading...
