350.305UK User Manual
Adding an additional receiver
Follow the instructions for Learn Mode
then pair each additional receiver to the transmitter.
Note: There is no limit to the number of receivers.
Trouble Shooting
1. Make sure the receiver is plugged in securely.
2. Make sure the transmitter has been synchronised
correctly with receiver.
1. Make sure the receiver is plugged in securely.
2. Ensure the receiver isn’t in Learn Mode
1. Metal structures, including door frames can result in
reduced transmission range. Avoid mounting transmitter
or receiver on or near metal structures.
2. Other electric equipment can cause radio interference
that affects your receiver.
3. Walls, doors and ceilings will reduce the range.
This product is classed as Electrical or Electronic equipment and should not be disposed with
other household or commercial waste at the end of its useful life. The goods must be disposed
of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
To Previous Page
Loading...
