remove and replace any of the
bulbs.
1. Remove the two (2) screws
retaining rear lamp to vehicle.
2. Remove rear lamp by pulling
rearward to disengage two lower
barbed retainers.
3. Remove socket from lamp.
4. Remove bulb from socket.
5. Install bulb in socket.
6. Install socket to lamp.
7. Replace rear lamp.
Hazard flasher
For more information on the
hazard flasher and hazard switch,
refer to Hazard switch in the
Roadside emergencies chapter.
For bulb replacement, see your
dealer.
Maintenance and care
175
To Next Page
Loading...
