EasyManua.ls Logo

Mercury Mountaineer 2002 - Page 285

Mercury Mountaineer 2002
313 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fluid Ford Part
Name
Application Capacity
Rear axle
lubricant
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
Refer to
Footnote 4
2.9-3.1L (5.5-5.8
pints)
Motorcraft SAE
75W-140 High
Performance
Synthetic Rear
Axle Lubricant
Refer to
Footnote 5
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
All vehicles 4.0L (4.2
quarts)
1
Ensure the correct automatic transmission fluid is used. MERCON and
MERCON V are not interchangeable. DO NOT mix MERCON and
MERCON V. Refer to your scheduled maintenance guide to determine
the correct service interval.
2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be checked by a qualified
technician.
3
Add the coolant type originally equipped in your vehicle.
4
All rear axles are filled with Motorcraft SAE 75W-140 High Performance
Synthetic Rear Axle Lubricant, part number XY75W140QL or
equivalent meeting Ford Specification WSL-M2C192A.
5
Limited Slip differentials must add 118ml (4oz) of additive Friction
Modifier XL3 or equivalent meeting Ford Specification EST-M2C118A
to the rear axle whenever the axle has been serviced.
Capacities and specifications
284

Table of Contents

Related product manuals