3 - SPECIFICATIONS
90-8M0098854 MARCH 2015 23
1
2
3
4
5
6
7
8
9
3.
M8 ‑ Drive rotation, overall ratio, and serial number are all
located under the cover or tie bar plate on the top of the upper
driveshaft housing.
4.
M8 ‑ The serial number is located on the starboard underside
of the upper gear housing.
5.
M8 ‑ The gear ratio is stamped on the bolt head located next
to the serial number label.
6.
M8 ‑ The running rotation is stamped on the back of the
gearcase strut.
Engine Model/Horsepower: ________________________
Engine Serial Number: ________________________
Transom Assembly Serial Number:
________________________
Sterndrive Serial Number and Gear Ratio:
________________________
Propeller Number and Pitch:
_________________________
Running Rotation: _________________________
Hull Identification Number: _________________________
Boat Model and Length: _________________________
GENERAL ENGINE SPECIFICATIONS (QC4V)
Crankshaft Horsepower...
1.
1100 HP (820 kW)
Displacement......... 9.04 L (552 c.i.)
Cylinder arrangement..... V‑8, 90°
Valve arrangement...... DOHC
Valves per cylinder...... 4
Cylinder numbering......
Port bank (1,3,5,7), Starboard bank
(2,4,6,8)
Rotation............ Clockwise facing front
Bore.............. 116 mm (4.57 in.)
Stroke............. 107 mm (4.2 in.)
Compression ratio....... 7.8:1
Turbocharger......... Water cooled, boost controlled
Altenator........... 105 amp / 1491 watt
Battery requirements...... Group 31 type
Ignition type..........
PCM 09 Distributorless with
sequential individual coils
Engine firing order....... 1 8 7 2 6 5 4 3
Spark plug type........ (NGK R‑7437‑9)
Spark plug gap........ 0.6 mm (0.023 in.)
Fuel system..........
Sequential Fuel Injection and electric
fuel pump
Emission Control System... Electronic Engine Control (EC)
1. Kilowatts/horsepower rating is in compliance with the SAE J1228/ISO 3046 Standard. Usable power will be reduced by gear losses.
To Next Page
Loading...
