EasyManua.ls Logo

Mercury Sable 2002 - Page 89

Mercury Sable 2002
241 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. To unlock the passengers door(s)
and liftgate (wagon), press the 3/4
control within five seconds of
unlocking the drivers door.
3. To unlock the trunk or liftgate
(wagon), enter the five-digit
factory-set code, then press the 5/6
control within five seconds.
Locking the doors and liftgate
(wagon), press the 7/8 and 9/0
controls at the same time. This can
be done at any time.
Autolock (if equipped)
The autolock feature will lock all of the vehicle doors when:
all doors are closed
the engine is running and
you shift into any gear putting the vehicle in motion
The autolock feature repeats when:
any door, except the drivers door, is opened then closed while the
engine is running and
you put the vehicle in motion
Deactivating/activating autolock
There are 2 methods to enable/disable this feature. One through your
dealer and the second with a power door lock sequence using the
following instructions:
1. Turn the ignition key to RUN, then press the power door UNLOCK
control 3 times.
2. Turn the ignition key to OFF, then press the power door UNLOCK
control 3 times.
3. Turn the ignition key to RUN, within five seconds press the power
door UNLOCK control 1 time. Wait for a delayed horn chirp to confirm
the system has been altered.
1 2
3
45678
9
0
1 2
3
45678
9
0
Locks and Security
88

Related product manuals