EasyManua.ls Logo

Mercury SD102P - Page 8

Mercury SD102P
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
350.137UK User Manual
5. Depress the test/hush button to check the alarm and warning LED are functioning correctly. The LED
will also flash every 40 seconds to inform you the unit is working properly.
Please note:
No user serviceable parts inside. The only replaceable part is the battery.
Test the alarm weekly and every time the battery is replaced.
When the battery power is low an intermittent beep will sound to indicate it needs replacing.
Do not use in dusty and smoky environments.
Keep out of the reach of children.
Any repairs should be carried out by qualified personnel.
Please retain this manual for future reference.
Intended for Fire Safety and installed in buildings
Essential characteristic 1: Pass
13 Essential characteristic 2: Pass
1134 Essential characteristic 3: Pass
1134-CPR-124 Essential characteristic 4: Pass
EN14604:2005/AC:2008 Essential characteristic 5: Pass
Photoelectric Smoke Detector Essential characteristic 6: Pass
350.126UK-001 Essential characteristic 7: Pass
Essential characteristic 8: Pass
This product is classed as Electrical or Electronic equipment and should not be disposed
with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.

Related product manuals