EasyManuals Logo

Mercusys ac12 Quick Installation Guide

Mercusys ac12
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Wired
Connect wirelessly using the SSID (Network Name) printed on the product label at
the bottom of the router.
1. Turn o the modem, and remove
the backup battery if it has one.
2. Connect an Ethernet cable from the
modem to the WAN port on your router.
3. Power on the modem, wait about 2
minutes for it to restart.
5. Verify that the hardware connection is correct by checking
the following LEDs.
Wireless
Note: If your Internet connection is through an Ethernet cable from the
wall instead of through a DSL/Cable/Satellite modem, connect the
Ethernet cable directly to the router’s WAN port.
1
Connect your computer to the router (Wired or Wireless).
AC1200 Dual Band Wireless Router
AC12
Quick
Installation Guide
Connect the
Hardware
1
Conf igure the
Router
2
Internet
Router
Modem
4. Power on the router.
Power Adapter
For more information, please visit our website:
http://www.mercusys.com
7107500059 REV1.0.0
WAN1 2 3 4 Power Reset
SYS 2.4G 5G WAN 4 3 2 1
status
Flashing
On/Flashing
On/Flashing
On/Flashing
LED
SYS
2.4G
5G
WAN
WAN1 2 3 4 POWER
RESET
WAN1 2 3 4 POWER
RESET

Other manuals for Mercusys ac12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys ac12 and is the answer not in the manual?

Mercusys ac12 Specifications

General IconGeneral
Product typeTabletop router
Product colorBlack
DSL WANNo
Ethernet WANYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
Antennas quantity4
Antenna gain level (max)5 dBi
Output current0.85 A
Output voltage9 V
Power source typeAC
Mobile network generation-
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
CertificationCE, ROHS
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Security algorithmsWPA-PSK, WPA2-PSK
Package depth288 mm
Package width382 mm
Package height66 mm
Package weight640 g
Weight and Dimensions IconWeight and Dimensions
Depth140 mm
Width222 mm
Height32 mm

Related product manuals