decompression software such as WinZIP or WinRAR to extract the firmware
file to a folder.
2. Launch a web browser, visit http://mwlogin.net and log in with the
password you set for the device.
3. Go to Advanced-> System Tools-> Firmware Upgrade or
Advanced-> System -> Firmware Update, click Browse to find the
extracted firmware file and click open.
4. Click the Upgrade button. The device will reboot automatically after
the upgrade has been finished.
5. Click Status, check if the device’s firmware has been upgraded.
Note: Some firmware updates will restore your MERCUSYS device to factory
settings. If this is the case, run the Quick Setup Wizard to reconfigure your
device.
To Next Page
Loading...
