1. Clear the wireless environment when running a speed test on your
wireless devices. Make sure that there are no barriers between the router
and wireless device running a speed test, and the best location is 6-9 ft
from the router. It’s better to put the clients (like phones or computers) and
router in the same horizontal plane.
2. Change the wireless channel and channel width on the Mercusys router.
You may refer to Changing Channel and Channel Width on a Mercusys Wi-
Fi router. (You may change 2.4G channel width to 40MHZ, 5G channel
width to 80MHZ or 160MHZ)
3. Disable the QoS and Parental Settings on the Mercusys router.(Please
refer to the tips at the bottom of the page),
To login to the webpage, you may follow this FAQ: How to log into the web-
based interface of the MERCUSYS Wireless Router?
How to place your Mercusys wireless router
for optimal reception and performance
This Article Applies to:
MR90X MR80X MR70X MR50G AC12G AC12 MW305R
When you buy a router, you may be confused about the best place to put
your router for the best performance. This article will give you a few tips.
To better understand how a router's wireless works, it's important to first
understand how antenna signals are transmitted.
In general, our antenna signals are radiated vertically and outward from the
antenna. Therefore, in order for our antenna signal to be able to transmit
better, we need to pay attention to the following problems when placing the
router.
To Next Page
Loading...
