Meridian 501 - Page 4

Preface
iv
Customising the Control
Unit 19
Describes how to set up the control unit in
your preferred configuration.
Choosing standard settings ................... 20
Configuring the sources......................... 23
Examples of configuring the
sources .................................................. 26
Programming levels ............................... 28
Specifying information about
your system ........................................... 30
Setting up the Control
Unit 33
Describes how to unpack and install the
control unit, and explains what you should
do if your control unit requires servicing.
Unpacking .............................................. 34
Connecting the control unit ................... 35
Troubleshooting ..................................... 39
Maintenance .......................................... 41
Service and guarantee ........................... 42
Index ...................................................... 43