Merlin 6-IN-1 DIY Educational Solar Toy Kit User Manual

1
Tools you may need:
Diagonal Cutter
Scissors
Pencil
Instructions:
For the assembly of all the different toys in this product two items
need to be assembled first. The Gearbox and the Solar Module.
Hint: Use a small side cutter to remove the individual pieces from
the main plastic assembly. Also remember to cut off the burr to
make a smoother edge.
1). Gearbox:
The gearbox drives the different toys.
a) Start by fitting the motor in its slot as per figure
1 and 2. Be careful to not put the motor in skew it can
damage the plastic parts.
6-in-1 DIY Educational Solar Toy Kit
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
The following items are enclosed in the box. Please note that this
product contains small plastic items that can easy be swallowed
by children. Adult supervision is recommended when having
children assemble this product.
Aditional recycled items required for assembly
of different toys:
Colored Box
Gear ( Orange )
Gear with Shaft ( Purple )
Motor with Connectors
Adhesive Tape
Eyes
Rubber Band
Rubber Belt
Wing
Black
Push
Red
Sponge
Solar Panel
Round Shaft
Gear with Shaft ( Green )

Merlin 6-IN-1 DIY Educational Solar Toy Kit Specifications

General

Number of Models	6
Power Source	Solar
Recommended Age	8 years and up
Assembly Required	Yes
DIY	Yes
Product Type	Educational Solar Toy Kit
Materials	Plastic
Educational Focus	STEM

Summary

Gearbox and Solar Module Assembly

Solar Module Construction and Wiring

Details the assembly of the solar module, including correct wire routing.

Gearbox Assembly and Module Merging

Guides the assembly of the gearbox and the connection of solar and gearbox modules.

CD Racer Assembly Instructions

Connecting Modules for CD Racer

Connects the main gearbox and solar modules for the CD Racer toy.

CD Racer Wheel Preparation and Assembly

Details the assembly of the wheels and the use of CDs for the CD Racer.

Walking Robot Assembly - Part 1

CD Racer Final Assembly Steps

Completes the CD Racer by attaching modules and wheels.

Walking Robot Body and Module Attachment

Starts the walking robot by assembling its body and attaching modules.

Walking Robot Assembly - Part 2

Walking Robot Component Integration

Walking Robot Leg Attachment and Completion

Drummer Robot Assembly

Walking Robot Final Steps and Disassembly

Drummer Robot Body, Feet, and Module Connection

Assembles the drummer robot's body, eyes, feet, legs, and connects modules.

Bottle Yacht Assembly - Part 1

Drummer Robot Module Connections

Bottle Yacht Initial Assembly: Solar to Gearbox

Bottle Yacht Assembly - Part 2

Bottle Yacht Clamp and Bottle Fitting

Bottle Yacht Drive and Propeller Assembly

Flying Bird Assembly - Part 1

Bottle Yacht Finalization and Weighting

Flying Bird Arm and Counter Balance Assembly

Flying Bird and Street Roller Setup

Flying Bird Module Attachment and Final Steps

Street Roller Initial Connections and Gearbox

Street Roller Assembly - Wheels and Cans

Street Roller Can Wheel Preparation

Street Roller Bottom Wheel and Can Assembly

Street Roller Final Assembly and Support

Street Roller Final Assembly and Operation

Product Maintenance, FAQ, and Limited Warranty