Need help?Do you have a question about the MERQUIP COSMETAL H2OMY TOP A and is the answer not in the manual?
General| Brand | MERQUIP |
|---|---|
| Model | COSMETAL H2OMY TOP A |
| Category | Water Dispenser |
| Language | English |
Important safety instructions for using the appliance, including handling and installation.
General advice for safe operation, maintenance, and manufacturer's rights.
Guidelines for selecting a safe and appropriate location for the appliance, avoiding hazards.
Instructions for safe connection and disconnection of the power supply to prevent electrical hazards.
Information on recycling packaging materials and environmental considerations for the appliance.
Guidance on placing the appliance correctly, ensuring clearance and proper ventilation for optimal operation.
Instructions for connecting the appliance to the water supply, detailing pressure requirements and safety devices.
Procedure for filling the ice container with water, including switching off the machine and connecting water tubes.
Details on connecting water for countertop and undercounter models, ensuring correct tube fitting.
Steps for draining the ice container for maintenance purposes, including power disconnection.
Instructions for connecting the appliance to the mains electricity supply, emphasizing safety and proper wiring.
Procedure for connecting a CO2 cylinder for carbonated water models, including safety precautions.
Guide to installing refillable CO2 cylinders, adjusting pressure, and filling instructions.
Recommendations for ensuring proper operation of the carbonation pump and handling water level issues.
Instructions for the hygienic cleaning of the appliance, including preparation and rinsing procedures.
How and how often to clean the external surfaces of the appliance using appropriate methods.
Procedure for replacing CO2 cylinders, referencing instructions in paragraph 6.2.
How and how often to clean the water collection tray, removing residue.
Instructions for cleaning the cooling condenser to maintain optimal performance, avoiding compressed air.
Procedure for water replacement in the ice bank tank, including defrosting and refilling steps.
Procedure for disassembling and cleaning the inlet pipe fitting filter for TOP models.
How to remove and descale water dispensing spouts using a food descaling solution.
Checking and descaling the water supply hose and filter annually for optimal performance.
Detailed procedure for hygienic cleaning, including safety precautions, solution preparation, and rinsing.
Procedure for removing limescale from the hot water tank, recommended annually or as needed.
Guide to diagnosing and resolving common operating anomalies, listing problems, causes, and interventions.
Troubleshooting steps for when the compressor fails to start, covering power and thermostat issues.
Diagnosing why the appliance operates continuously without cooling effectively, checking ventilation and thermostat.
Troubleshooting tips for continuous compressor operation without proper cooling, checking for gas leaks.
Identifying causes of noise during normal operation, such as machine leveling or pipe contact.
Resolving issues with slow or no cold water output, checking inlet pressure and filters.
Troubleshooting low carbonation levels, checking CO2 pressure and outlet water temperature.
Diagnosing when only gas is dispensed from the carbonated water outlet, checking water supply and pump.
Addressing continuous dripping from dispensing outlets, checking solenoid valves.
Troubleshooting when still water is dispensed as carbonated, checking inlet water shortage.
To Next Page
