Features of Mesis
®
PressoMassaggio
®
Plus
+
Main features
• Mesis
®
PressoMassaggio
®
Plus
+
is sequential and intermittent;
• Adjustable continuous pressure
• Optimal massage by means of the 4 cus;
• Integrated timer to adjust the duration of massage;
• Control valve can supply a constant pressure;
• Fast connection of accessories and easy use of the unit.
Terminology
• Program: method of inating the cus;
• Chambers or segments: elements that the applicator is made up of and that ll with
air. In the Mesis
®
PressoMassaggio
®
Plus
+
the cus of the applicators are 4.
• Cycle: one cycle equals the ination of all cus, from the rst to the last one independent
of the program used. After ination of the last cu, there is a break and then a new cycle
starts;
• Applicator: pneumo-soothing elements composed of several cus that are sequentially
inated and regulated by the selected program, (legs cu, arm cu and abdominal/but-
tocks belt);
• Time: duration of session (adjustable from 1 to 30 minutes);
• Pressure: quantity of air introduced into the chambers, the pressure is adjustable and
continuous;
• Connector: it is an accessory made up of joined rubber tubes and allows the applicators
to be connected to the machine or to the splitter;
• Splitter: it is an accessory made of rubber tubes joined together. The use of 1 splitter,
allows the use of the two leg cus while the use of 2 splitters, allows the use of three
accessories at the same time, for example the two leg cus and the abdominal/buttocks
belt;
• Nozzle: end part (air outlet) of each connector‘s hose that must be inserted into the
seats located on the applicators;
• Seat: located on the applicator. This is where the connector‘s nozzles must be inserted.
Program (sequence)
Program A
The pressure is exerted by one cu at a time.
Programma A
38
English User manual: PressoMassaggio
®
Plus
+