Mesis
®
PressoMassaggio
®
Plus
+
operating instructions
IMPORTANT: to prevent the compressor (heart of the equipment) from being
subjected to sudden movements and blows during transport, it has been blocked. This solu-
tion was adopted to guarantee the integrity, functionality and quality of the equipment. The
compressor must then be unlocked in the following mode.
BEFORE CONNECTING THE POWER CORD AND PERFORMING
ANY OPERATION ON THE MACHINE, IT IS ABSOLUTELY NE-
CESSARY TO PERFORM THE FOLLOWING OPERATIONS:
• turn the appliance upside down and locate the small square door on the lower part;
• temporarily remove the ap;
• in the small compartment just opened, locate the screw that must be unscrewed and
removed using the appropriate screwdriver supplied;
• once the screw has been removed, reposition the ap;
• recoil the equipment again by resting it on its base;
• proceed as described in the following paragraphs of the current chapter and in the chap-
ter “Instructions for use of 4-chamber applicators.
Flap
Flap removed
Screw that must be
unscrewed and removed
Unscrew and remove
the screw
Screwdriver
supplied
42
English User manual: PressoMassaggio
®
Plus
+
To Next Page
Loading...